MITSUBISHI L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual

"Universal output function: source type.
Program capacity: 20K step.
Basic operations processing speed: 60ns.
Communication interface: USB/RS-232.
Control mode: stored procedure repeated operation.
Input / output points: 1024 points.
End cap.
Unable to install display module (L6DSPU-C-CM), RS-232 adapter, RS-422/485 adapter L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual.
CPU built-in functions can be easily set through programming tools L26CPU-CM
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated ".
High precision PWM control of the highest 200kHz.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual. "DC input.
Number of input channels: 2Ch.
DC5/12/24V input.
Maximum count rate: pulse/s 200k.
Linear counter function.
Ring counter function.
Uniform output function.
Preset function.
Count invalid function.
Latch counter function.
Sampling counter function.
Periodic pulse counter function.
Flexibly applied to various applications
Combination of functions,
Easy to achieve speed measurement, long measuring function, the single pulse output, the ratio of the set / distribution output, PWM control, cam switch control, such as a wide range of control.
Single pulse.
To trigger the input as a starting point, with a minimum 25ns unit to adjust the ON/OFF time.
The action time deviation of ON/OFF is ns level, so it can achieve high precision control.
Velocity measurement and length measurement
In aaddition to the measurement of ON width and OFF width,
Can also achieve different sensor ON time difference and other conditions of the measurement L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual.
The high precision measurement of the smallest 25ns unit can be realized L26CPU-CM Common Instructions Manual L26CPU-CM Programming Manual.
Delayed output
The output time delay of each channel can be adjusted so that the error output can be realized.