MITSUBISHI FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL

5 in each package.
Application: to protect the surface of the display, to prevent the operation of oil or other material pollution.
The contaminated part of the adhesive film can be replaced.
Specifications: 120*92mm.
Application Series: F940GOT, hand held GOT. Power: 55kw.
Purpose: to suppress the power harmonics FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL.
Improve the power factor, reduce the input side of the high harmonic current FX2NC-32MT-D/UL
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) RS-485 communication adapter.
(need FX1N-8AV-BD).
(FX1S and FX1N host general). Total points: 24 points.
Input points: 14 points.
Output points: 10 points.
Voltage: AC220V.
Output type: transistor.
Outline dimension: 90*75*90.
FX1N series is a very powerful micro PLC,
Can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL.
Communication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect. Enter 32 points or 32 points;
Divided into 16 points, 16 points out of the output.
Directly connected to the input and output terminals of PLC;
Can play a role in replacing the terminal row;
Can also be far away from the PLC of the site when the input and output devices;
Use as relay;
In order to reduce the time of the input and output connection. MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 3.7KW.
FR-A700 converter products are suitable for all kinds of high load requirements of the equipment.
Such as lifting, lift, printing and dyeing, printing and dyeing, material coiling and other general occasions.
High level driving performance.
Unique sensorless vector control mode,
A wide variety of mechanical equipment can be operated at high precision in the superr low speed region without the need of the encoder FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL.
With torque control mode,
And in the speed control mode can use the torque limit function.
With vector control function (with encoder),
Frequuency converter can achieve position control and fast response, high precision speed control (zero speed control, servo lock, etc FX2NC-32MT-D/UL Manual FX2NC-32MT-D/UL HARDWARE MANUAL. ) and torque control.