Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX3U module
>> FX3U-128BTY-M | MITSUBISHI Bitty AnyWire master station FX3U-128BTY-M
FX3U-128BTY-M | MITSUBISHI Bitty AnyWire master station FX3U-128BTY-M
MITSUBISHI FX3U-128BTY-M Manual And Instructions
FX3U-128BTY-M datasheetPDF datasheet
MITSUBISHI FX3U-128BTY-M Product information and technical parameters：
Brand: MITSUBISHI
Name: Bitty AnyWire master station
Model: FX3U-128BTY-M
Function: Bitty AnyWire master station.
DC5V internal consumption current: 130mA.
...More relevant models >>>>
FX3U-128BTY-M datasheetPDF datasheet
MITSUBISHI FX3U-128BTY-M Product information and technical parameters：
Brand: MITSUBISHI
Name: Bitty AnyWire master station
Model: FX3U-128BTY-M
Function: Bitty AnyWire master station.
DC5V internal consumption current: 130mA.
RS-485 communication adapter.
(need FX1N-8AV-BD).
(FX1S and FX1N host general). Length: 3.0m.
Specification: TB-FX round cable. Analog input points: 4 points (PT1000/Nil000).
Resolution: 0.1 degrees.
Weight: 0.1kg.
Dimensions: 17.6 x 90 x 89.5.
FX3U-4AD-PNK-ADP is a PT1000/Nil000 temperature sensor with analog input adapter MITSUBISHI FX3U-128BTY-M.
Thermocouple (K type, J type) and PT1000/Nil000 temperature sensor with analog input adapter FX3U-128BTY-M
-100~1000 degree can be measured by 4 channels.
No programming to send data to FX3 series.
Connect FX3SA, FX3S, FX3GA, FX3G, FX3U,
Need to convert adapter or function extension board. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points.
Output type: relay output MITSUBISHI FX3U-128BTY-M.
Power supply voltage: DC24V.
Input signal voltage: DC24V.
8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type) MITSUBISHI FX3U-128BTY-M.
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register FX3U-128BTY-M.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program FX3U-128BTY-M.
(need FX1N-8AV-BD).
(FX1S and FX1N host general). Length: 3.0m.
Specification: TB-FX round cable. Analog input points: 4 points (PT1000/Nil000).
Resolution: 0.1 degrees.
Weight: 0.1kg.
Dimensions: 17.6 x 90 x 89.5.
FX3U-4AD-PNK-ADP is a PT1000/Nil000 temperature sensor with analog input adapter MITSUBISHI FX3U-128BTY-M.
Thermocouple (K type, J type) and PT1000/Nil000 temperature sensor with analog input adapter FX3U-128BTY-M
-100~1000 degree can be measured by 4 channels.
No programming to send data to FX3 series.
Connect FX3SA, FX3S, FX3GA, FX3G, FX3U,
Need to convert adapter or function extension board. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points.
Output type: relay output MITSUBISHI FX3U-128BTY-M.
Power supply voltage: DC24V.
Input signal voltage: DC24V.
8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type) MITSUBISHI FX3U-128BTY-M.
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register FX3U-128BTY-M.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program FX3U-128BTY-M.
...More relevant models >>>>
Last one: MITSUBISHI AnyWireASLINK master station FX3U-128ASL-M
next one: MITSUBISHI Battery FX3U-32BL
Related download