MITSUBISHI Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual

2 axes, open collector output type.
2 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Maximum pulse output: 200Kpps.
40 pin connector.
Positioning module.
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual Q24DHCCPU-LS
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control.
(the command pulse of the open collector positioning module is highest 200kpps.) Output: 2 channels.
Input (resolution): 0~12000; -12000~12000; 0~12000; -16000~16000 Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual .
Output DC0~20mA; DC-12~12V.
Conversion speed: 10ms/1 channel.
18 point terminal station.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark.
Provide support for process control using a general purpose programmable controller Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual .
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module. Input / output points: 4096 points.
Number of input and output elements: 8192.
Program capacity: 130 K step.
Processing speed: 0.0095 s.
Program memory capacity: 520 KB.
Support USB and RS232.
Support installed memory card.
Providing high speed communication between multiple CPU.
High speed and high precision data processing.
The processing speed of the real number (floating point) arithmetic has been greatly improved,
Addition instruction reached 0.014 mu s,
Therefore, it can support the request of high-speed, high-precision processing data processing.
In addition, the new addition of double precision floating point arithmetic instructions,
Simpliffy the programming, reduces the computational error when executing complex formula Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual .
Shorten the fixed scan interrupt time, high precision device.
The minimum interval of the fixed period interrrupt program is reduced to 100 s Q24DHCCPU-LS SFC Manual Q24DHCCPU-LS Programming Manual .
The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.