MITSUBISHI Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual

Control axis: up to 16 axes.
Interpolation function: linear interpolation (maximum 4 axis), arc interpolation (2 axis), spiral interpolation (3 axis).
PLC capacity: 60K step.
Can control the maximum 16 axis servo amplifier.
With the position control, speed control, torque control, advanced synchronous control and other rich control methods Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual.
The incremental synchronous encoder I/F and the symbol detection signal I/F are integrated in the 1 modules Q00UJCPU
Capacity expansion can be expanded to PLC capacity 60K step (using Q170MSCPU-S1), the 7 layer of the substrate.
Combined with the servo amplifier to achieve safe torque off (STO).
Connect directly to the visual system produced by Ethernet through the COGNEX connection Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual.
Connection SSCNET III /H main module LJ72MS15 can use the MELSEC-L series of input.
Output module, analog input and output module, high speed counter module.Battery replacement.
Initial voltage 3.0V.
Replacement of large capacity battery module without cable.
Current capacity: 18000mAh.
Service life: 5 years.
Outline dimension: 98*55.2*87mm."X 10BASE-T/100BASE-T 1 channel Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual.
No need to use PC to meet all the recording needs of the high-speed data recorder module.
High speed, simple, low cost, the accuracy of data records beyond the past.
Can be used to guide the form of a simple set of high speed data recorder module configuration tool",
And display the collected data with the trend chart,
Help to carry out data analysis, etc. the recording data display / analysis tool "LogViewer GX"".
By accumulating all kinds of data in the production process,
Not only can help improve the quality of products, reduce production costs, but also for the optimization of the system,
Contribute to the construction of an efficient production site. "2 axes, open collector output type.
2 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Maximum pulse output: 200Kpps.
40 pin connector.
Positioning module.
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differenntial drive output type 2 types Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control Q00UJCPU MELSAP-L Manual Q00UJCPU Programming Manual.
(the command pulse of the open collector positioning module is highest 200kpps.)