MITSUBISHI MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide

Cable length: 5m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-SFS; HC-LFS; HC-RFS; 2000r/min HA-LFS; HC-UFS servo motor.
-H products have a long flex life.
Coding is not resistant to oil. 1 axis servo amplifier.
MITSUBISHI general AC servo amplifier MELSERVO-J4 series.
Rated output: 0.6kw.
Interface: SSCNET III /H MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide MR-J2-100A
Power supply: three phase AC400V.
0.6kW and 1kW above the servo amplifier.
Servo amplifier supporting SSCNET III /H.
Complete synchronization system capable of using high speed serial optical communication.
Can be combined with the servo system controller to maximize the performance of the servo system.
2 low frequency vibration can be suppressed at the same time by supporting the seismic algorithm of 3 inertial equipment MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide.
Configurator2 MR to achieve convenient adjustment.
Effectively restrain the low frequency aftershock effect produced by the front end of the boom or the main body of the device 100Hz.
Can effectively shorten the time to control the stability of the aftershock.
In the XY design of trajectory control, improve the accuracy of arc track.
At the same time, it can effectively control the phenomenon of quadrant protrusion caused by the rotation direction of the servo motor, which is caused by friction and twisting MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide. Length: 1 meters.
Purpose: MR-BT6VCASE. Drive unit.
MITSUBISHI universal AC servo amplifier MELSERVO-J4 series.
Rated output: 37kw.
Interface: universal type.
Power supply: three phase AC400V.
Support position control, speed control, torque control.
Position control to follow the position instructions.
When the control is inserted, the position control is performed.
Speed control follows the speed command to control the speed within a certain range.
Torque control to follow the torque command to control the stable torque.
Function of switching amplitude. The increase in the process of swiitching and stopping,
And in the operation of the use of the switching signal, switching growth MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide. The length of the line: 10M.
IP level: IP65.
Cable outlet direction:: the same side of the motor shaft MR-J2-100A Manual MR-J2-100A Absolute Position Detection System Installation Guide.
Bending life: standard.
Encoder with cable (motor side); for HF-KP/HF-MP series (motor shaft with side extraction).