MITSUBISHI GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual

GOT2000/1000 series with IE CC-Link field network communication module.
GOT communication module supporting IE CC-Link field network.
Can be used as the IE CC-Link field network of intelligent equipment station, to construct the system containing the display.
Support for the GOT model GT27, GT16, GT15 GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual. 256MB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOT GT1020-LBD2 Bus connection (1 channel) unit standard model for QnA/ACPU/ transport controller CPU (A series).
Applicable models: GT15, GT16. Series introduction: set a number of basic functions in a small body model.
Screen size: 4.5 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual.
Host frame color: white.
Power type: DC24V.
GT10 backlight: white backlight.
Communication interface: with built-in RS-422.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth. For the graphic operation terminal on the back of the extra CF port (B disk).
Applicable models: GT16, GT15. Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT105. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 5.7 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen systeem GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1020-LBD2 Manual GT1020-LBD2 Instructions Manual.