MITSUBISHI FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II

Max input / output points: 48 points.
Supply voltage: 100 - 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: silicon controlled.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II FX2N-32MT-E/UL
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit.
Note recording function, Component annotation can be recorded in the program register.
Online programMITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 75KW.
When the ring is opened, the frequency converter is provided with a load of the motor when the motor is operated with a load at a given frequency,
The range of the motor speed in the rated slip ratio (1%~5%) changes.
For the requirements of relatively high precision, even if the load changes are also required to operate at a giiven speed of the occasion,
Inverter with PG feedback function can be used (selection) FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II.
If the given acceleration time is too short, the output frequency of the inverter is far more than thhe change of the speed (electric angular frequency),
Converter will be due to flow over the current trip, the operation stopped, which is called stall FX2N-32MT-E/UL Manual FX2N-32MT-E/UL PROGRAMMING MANUAL II.