MITSUBISHI FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE

Image operation panel equipped with liquid crystal display.Total input and output points: 32 points.
Input points: 16 points.
Output points: 16 points.
Output type: relay output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
8K capacity of the RAM memory, the maximum can be extended to 16K FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE.
CPU arithmetic processing speed of 0.08 S/ basic instructions FX1N-422-BD
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017) FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program. Analog input expansion board (2 channel)."Power: 15kw.
Voltage: 200V.
Brake resistor, a kind of ripple resistance, is mainly used in the mechanical system of the inverter to control the speed of the motor,
Help the motor to be converted into heat energy due to the regenerative power of the motor.
Braking unit principple: the brake unit is composed of a high power transistor GTR and its driving circuit FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE.
Its function is to link the discharge current braking resistor capacitor voltage or not in the range of the time connsumed and the DC part "overpressure",
Need to add external braking components, in order to speed up the speed of the consumption of renewable energy FX1N-422-BD Manual FX1N-422-BD USER'S GUIDE. "