MITSUBISHI FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL

Max input / output points: 10 points.
Power supply voltage: DC24V.
Input points: 6 points.
Output points: 4 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control FR-S540E-0.4K to 3.7K
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL. MITSUBISHI inverter series: FR-F842.
Voltage level: three phase 400V.
Power: 560kw.
SLD converter rated current: 1212A.
Structure and function: the rectification part is off type.
Type: CA.
Substrate coating: have.
Energy saving by high efficiency motor.
Reduce standby power consumption.
DC24V external power supply, the input MC signal can be stopped after the motor for the OFF, in the motor drive for the ON.
Standby power management can be carried out by means of frequency converter to realize the power consumption reduction of standby time.
According to the temperaturre of the inverter cooling fan, the operation of the inverter can be controlled FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL.
According to the operating conditions of the inverter cooling fan output the correspondinng signal,
Therefore, the inverter and other built-in fan and inverter cooling fan synchronous operation FR-S540E-0.4K to 3.7K Detailed Manual FR-S540E-0.4K to 3.7K INSTRUCTION MANUAL.
Can reduce the power consumption in the stop.