MITSUBISHI A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual

Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display equipment: high brightness TFT color display.
Display color: 256 color.
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 3M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual A960GOT-EBD
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual. 8 slots.
Power supply unit.
QnAS series unit installation.
High speed access.
I/O points is an important indicator of PLC.
Reasonable selection of I/O points can not only satisfy the control requirements of the system,
And the total investment of the system is the lowest.
The input and output points and types of PLC should be determined according to the analog quantity and switch quantity of the controlled object,
Generally an input / output element to take up an input / output point.
Taking into account the future adjustment and expansion,
In general should be estimated on the total number of points plus the amount of spare 20%~30%.
When the programmer input programinto the user program memory,
Then CPU according to the function of the system (the system program memory to explain the compiler),
Translate the user program into PLC internally recognized by the user to compile the program.
Relay output interface circuit of PLC
Working process: when the internal circuit output digital signal 1,
There is a current flowing through, the relay coil has a current, and then the normally open contact is closed,
Provide load current and voltage.
When the internal circuit outputs a digital signal 0, there is no current fflowing through it,
The relay coil does not have a current, and the normally open contact is broken off,
A current or voltage that is discoonnected from the load A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual A960GOT-EBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A960GOT-EBD Operating Manual.
It is through the output interface circuit to the internal digital circuit into a signal to make the load action or not action.