MR-J2S-500CP | MITSUBISHI Built in positioning function servo amplifier MR-J2S-500CP

Motor series: ultra low inertia, low power.
Rated output power: 0.2kw.
Rated speed: 3000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: ultra low inertia is suitable for high frequency operation MITSUBISHI MR-J2S-500CP.
Application examples: the insertion device, the assembly machine. Servo motor series: low inertia, small capacity MR-J2S-500CP
Rated output: 0.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Oil seal: have.
Corresponding servo amplifier: MR-JE-10B/MR-JE-10A.
Support position control, speed control, torque control, push and press control.
Position control can use linear, arc interpolation controller, fixed size feed control, target position change and other rich functions MITSUBISHI MR-J2S-500CP.
The position control and torque control are realized by switching control mode.
The gain adjustment of servo can be simply performed by the advanced one key tuning function.
At the same time, it is also able to suppress the low frequency vibration of the manipulator by the advanced vibration suppression control II,
Shorten the time to complete the positioning, so as to achieve the production of the rhythm of the shortening MITSUBISHI MR-J2S-500CP. Servo motor series: flat type, medium power.
Rated output: 1.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Features: flat type of the model is very suitable for servo motor installation space is limited occasions.
IP level: IP65.
Application example:
1, industrial robots.
2, food processing machinery.
Abundant motor product line can optimize the performance of the machine.
Has a rich motor product line including a rotary servo motor, linear servo motor and direct drive motor. Motor series: low inertia, medium capacity.
Rated output power: 11.0kw.
Rated speed: 1500rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the seervo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttarget value, the driver adjusts the rotation angle of the rotor MR-J2S-500CP MR-J2S-500CP.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).