Home
>> Products
>> MITSUBISHI
>> L series PLC
>> Positioning movement module
>> LD77MS2 | MITSUBISHI Simple motion control module LD77MS2
LD77MS2 | MITSUBISHI Simple motion control module LD77MS2
MITSUBISHI LD77MS2 Manual And Instructions
LD77MS2 datasheetPDF datasheet
LD77MS2 Positioning controlUser's Manual
MITSUBISHI LD77MS2 Product information and technical parameters：
Brand: MITSUBISHI
Name: Simple motion control module
Model: LD77MS2
Control axis: maximum 2 axes.
Operation cycle: 0.88ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.
Color signal: 2 points.
Color detecting set: 4 set.
Only need to use the PLC program can easily achieve synchronous control, cam control, speed and torque (push pressure control) and other advanced motion control.
Equipped with standard synchronous encoder and color detection function necessary function.
Can be no procedures for setting. Strong support for MELSOFT.
Can fully apply LD77MH of the old program.
Let motion control more simple.
...More relevant models >>>>
LD77MS2 datasheetPDF datasheet
LD77MS2 Positioning controlUser's Manual
MITSUBISHI LD77MS2 Product information and technical parameters：
Brand: MITSUBISHI
Name: Simple motion control module
Model: LD77MS2
Control axis: maximum 2 axes.
Operation cycle: 0.88ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.
Color signal: 2 points.
Color detecting set: 4 set.
Only need to use the PLC program can easily achieve synchronous control, cam control, speed and torque (push pressure control) and other advanced motion control.
Equipped with standard synchronous encoder and color detection function necessary function.
Can be no procedures for setting. Strong support for MELSOFT.
Can fully apply LD77MH of the old program.
Let motion control more simple.
Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Output channel number: 4ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 20 s/ch.
Resolution: 1/20000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm MITSUBISHI LD77MS2.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm LD77MS2
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement MITSUBISHI LD77MS2.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output MITSUBISHI LD77MS2. Can be used to locate the wiring between drives.
Trunk terminal available for external input signal. Can be used as a screw relay terminal.RS-232, RS-422/485.
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication.
In addition, only the communication protocol library is required to selectt the equipment to be carried out,
Immediate connection LD77MS2.
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply crreate a corresponding protocol for communication LD77MS2.
The content of the communication protocol that can be created in the list,
Can also be simply edited.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 20 s/ch.
Resolution: 1/20000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm MITSUBISHI LD77MS2.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm LD77MS2
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement MITSUBISHI LD77MS2.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output MITSUBISHI LD77MS2. Can be used to locate the wiring between drives.
Trunk terminal available for external input signal. Can be used as a screw relay terminal.RS-232, RS-422/485.
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication.
In addition, only the communication protocol library is required to selectt the equipment to be carried out,
Immediate connection LD77MS2.
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply crreate a corresponding protocol for communication LD77MS2.
The content of the communication protocol that can be created in the list,
Can also be simply edited.
...More relevant models >>>>
Last one: MITSUBISHI Simple motion control module LD77MS4
next one: MITSUBISHI Positioning module LD77MH16
Related download