MITSUBISHI
Home >> Products >> MITSUBISHI >> FX series PLC >> FX all modules and accessories >> FX all accessories >> FX2C-I/O-CON-S | MITSUBISHI Connector FX2C-I/O-CON-S

FX2C-I/O-CON-S | MITSUBISHI Connector FX2C-I/O-CON-S

MITSUBISHI FX2C-I/O-CON-S Manual And Instructions
FX2C-I/O-CON-S datasheetPDF datasheet

MITSUBISHI FX2C-I/O-CON-S Product information and technical parameters:
Brand: MITSUBISHI
Name: Connector
Model: FX2C-I/O-CON-S
Needle number: 20.
Specification: loose wire connector, 5 sets (0.3mm 2).

Function expansion board for RS-232C communication.Display and setting data in a programmable controller.
Can monitor or set the timer, counter, data register.
Half the 16 characters *4, full width of 8 characters, Japanese *4 (JIS first, second), English digital. Power supply: 110mA DC5V (PLC internal power supply), 90mA DC24V (external power supply) MITSUBISHI FX2C-I/O-CON-S.
Analog input points: 4 points FX2C-I/O-CON-S
Voltage input: DC-10~10V.
Current input: DC-20~20mA, 4~20mA.
Weight: 0.2kg.
Dimensions: 55 x 90 x 87.
Voltage input and current input of 4 channels can be carried out,
Each channel can be specified as a current input or voltage input.
Built in digital filter function and peak hold function, etc.,
Achieved a high speed of 500 AD S/ch conversion MITSUBISHI FX2C-I/O-CON-S.
FX3U-4AD can connect FX3GA/FX3G, FX3GE, FX3U series.
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-IPS-5V. High speed input adapter (FX3U- - racy -BD)Enter 32 points or 32 points;
Divided into 16 points, 16 points out of the output.
Directly connected to the input and output terminals of PLC;
Can play a role in replacing the terminal row;
Can also be far away from the PLC of the site when the input and output devices;
Use as relay;
In order to reduce the time of the input and output connection MITSUBISHI FX2C-I/O-CON-S. Max input / output points: 20 points.
Supply voltage: 100 - 240VAC.
Input points: 12 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption (W): 20.
Weight (kg):0.4.
Size (WxHxD) mm:75x90x75.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control systemm for a simple manipulator FX2C-I/O-CON-S.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and caan be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment FX2C-I/O-CON-S.


...More relevant models >>>>