MITSUBISHI Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual

Output: 2 channels.
Input (resolution): 0~12000; -12000~12000; 0~12000; -16000~16000.
Output DC0~20mA; DC-12~12V.
Conversion speed: 10ms/1 channel.
18 point terminal station.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual Q06CCPU-V-B
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual .
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module. PCI bus.
Support Japanese, English OS.
SI/QSI/H-PCF/ broadband H-PCF cable Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual .
Dual loop controller network (control station / common station).
Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.
Using Ethernet cables and connectors available on the market to reduce costs.
High speed communication capable of communicating with 1Gbps.
Improve the communication response, significantly shorten the cycle time.
Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.
Data can be read or written to other station programmable controller.
Status of IE CC-Link field network can be confirmed by Works2 GX.
Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,
So it can reduce the time of abnormal to resume normal operation.
Province distribution network module in cabinet and device.
Link to connnect the 64 stations when the fastest scanning time for 1 Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual . 2ms (rate 2.5Mbps).
According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.
CC-Linkk/LT from the station does not need any parameter settings Q06CCPU-V-B SFC Manual Q06CCPU-V-B Programming Manual .
Only need to set up the transmission speed in the master module, you can use the remote I/O.