MITSUBISHI MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual

MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 1.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for direct drive servo motor.
Power specification: three phase AC200V.
Direct drive system suitable for high speed and high precision!
High speed operation can be realized by direct drive (2m/s), and the traditional mechanical transmission can not achieve such a high speed MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual MR-E-200A-KH003
The full closed loop control can be realized by using the position feedback signal from the load side encoder, such as the linear encoder.
The use of a flexible linear servo motor drive components can make the system more compact structure.
The primary side of the linear servo motor (motor coil) is sliding along the secondary side (permanent magnet) of the motor,
So linear servo motor is especially suitable for large range of applications MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual. In addition, linear servo motor can be connected in series,
Especially for large systems in two axes for high precision synchronous operation. The length of the line: 2M.
IP level: IP65.
Relay type.
Bending life: standard MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual.
The cable is not shielded.
Connector kit for motor electromagnetic brake.
Cable for electromagnetic brake, for HF-KP/HF-MP series (motor shaft with side extraction). MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 7.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: three phase AC400V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically.
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual.
TThe automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine MR-E-200A-KH003 Manual MR-E-200A-KH003 Instruction Manual.