MITSUBISHI GT2710-VTWD Microcomputers, MODBUS/Fieldbus Products, Peripherals Manual GT2710-VTWD Connection Manual

Cable length: 20.6m.
Long distance connection between CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller.
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11. 128MB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOT. For analog RGB input 2CH (2ch simultaneous display) MODBUS/Fieldbus Products.
Applicable model: GT27. Protective film for 10.4 inch screen GT2710-VTWD
Transparent (frame: white), 5.
Applicable model: GT16. Cable length: 1.2m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Protective film for 5.7 inch screen.
Scrub, 5.
Applicable model: GT11. Length: 3 meters.
Connection between a connector adapter box and a smart GOT MODBUS/Fieldbus Products.
Applicable model: HandyGOT. Optical fiber loop unit.
Applicable models: GT15, GT16, GT27, GT25. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: AC100~240V MODBUS/Fieldbus Products.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports Peripherals Manual GT2710-VTWD Connection Manual.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed Peripherals Manual GT2710-VTWD Connection Manual.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface Peripherals Manual GT2710-VTWD Connection Manual.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry ccloth touch screen on the surface of the water GT2710-VTWD Microcomputers.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it MODBUS/Fieldbus Products.