MITSUBISHI GT2708-STBD Hardware Manual GT2708-STBD User's Manual

USB interface protection cover on the front panel of the host computer (for replacement).
For 15 inches /12.1 inches /10.4 inches /8.4 inches.
Applicable model: GT15. Support for 5.7 inch.
Applicable models: GT16, GT15. A series of high performance models that are widely used in network or single machine work environments GT2708-STBD Hardware Manual GT2708-STBD User's Manual.
Screen size: 12.1 inches GT2708-STBD
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB) GT2708-STBD Hardware Manual GT2708-STBD User's Manual.
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2708-STBD Hardware Manual GT2708-STBD User's Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. Cable length: 1.5m.
For the connection between A/QnACPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Cable length: 115m GT2708-STBD Hardware Manual GT2708-STBD User's Manual.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. 8.4 inches.
Surrface treatment: transparent GT2708-STBD Hardware Manual GT2708-STBD User's Manual.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25.