MITSUBISHI GT1565-VTBD Manual GT1565-VTBD User's Manual

Cable length: 1.5m.
For the connection between QCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. Cable length: 10m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT.
Connection between serial communication unit (AJ71QC24-R4) and GOT GT1565-VTBD Manual GT1565-VTBD User's Manual.
Applicable models: GT10, GT21. A series of high performance models that are widely used in network or single machine work environments GT1565-VTBD
Screen size: 8.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422 GT1565-VTBD Manual GT1565-VTBD User's Manual.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT1565-VTBD Manual GT1565-VTBD User's Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. Cable length: 35m.
For long distance connections between QCPU and GOT (above 13.2M) ((need A9GT-QCNB) GT1565-VTBD Manual GT1565-VTBD User's Manual.
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. For the GT1562-VNB.
Applicable model: GT15. Used to install SD storage cards.
Applicable modeel: GT21 GT1565-VTBD Manual GT1565-VTBD User's Manual. Cable length: 3.0m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25.