MITSUBISHI FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL

Power: 15kw.
Voltage: 200V.
Purpose: high frequency braking resistor.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor.
Can also be connected without built-in brake transistor inverter.
Three types of discharge resistors are available FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL.
Please select according to the required braking torque FX3UC-64MT/D Power: 22kw.
Voltage: 200V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL. Axis of control: 1.
Applicable PLC:FX1N, FX2N, FX3U, FX2NC (to FX2NC-CNV-IF).
Applicable PLC:FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V).
7 operating modules required for easy positioning control are provided.
Type of instruction, please refer to the list in front of you.
One can control a shaft FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL.
FX3U, PLC FX2N can connect up to 8 units,
PLC FX2NC can connect up to 4 units,
PLC FX3UC can connect up to 7 units, so that it can control more than one independent axis.
Maximum can output 100kHz pulse train.
Positioning control through the control program. Max input / output points: 60 points.
Supply voltage: 100 - 240VAC.
Input points: 36 points.
Output points: 24 points.
Output type: Transistor (source).
Power consumption (W): 35.
Weight (kg):0.8.
Size (WxHxD) mm:175x90x75.
Terminal row type standard machine with extended input output
Can also be less of a system with analog or communication, etc..
CPU, power supply, input and output integration.
Display module or function expansion board can be less installed.
In addition, you can also reduce the input output or special module.
Built in 8000 step EPROM memory.
No battery. Maintenance free.
Overseas oriented products meet all kinds of international standards.
FX1N series is a very powerful micro PLC, can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board.
Communication and data link function opptions make FX1N in the volume, communication and special function modules and other important applications is very perfect FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL.
A PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped wiith 7 special positioning instructions,
Including zero return, absolute position readout, absolute or relative drive, and special pulse output control FX3UC-64MT/D Manual FX3UC-64MT/D HARDWARE MANUAL.