MITSUBISHI FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL

The output signal can open collector output inverter host standard.
Can be from the voltage output terminal (AM0), the current output terminal (AM1) output analog signal (output frequency, output current, etc.).
Can be connected to the 20mA DC or 10V DC meter. "Max input / output points: 16 points.
Supply voltage: 100 - 240VAC FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL.
Input points: 8 points FX3U-80MT/ESS
Output points: 8 points.
Output type: relay.
Power consumption: 30VA.
Weight (kg):0.65.
Size (WxHxD) mm:130x90x87.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL.
A total of 8 special function modules can be configured for each FX2n main unit.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). Converts the built-in I/O function to the screw terminal.Function: bus convert FX5 to FX3. FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL.
Input and output points: 8 points.
Conversion module connecting FX3 series expansion module.
FX3 series expansion module, only the right side of the bus conversion module can be connected. Converrt connector to screw relay terminal FX3U-80MT/ESS Manual FX3U-80MT/ESS HARDWARE MANUAL.
The action of the signal of the conversion module is shown in the light of the lamp.
Positive common end display.