MITSUBISHI FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL

MITSUBISHI inverter FR-E720 series.
Voltage level: 3 phase 200V.
Frequency converter capacity: 7.5KW.
In order to ensure the reliability of production, all production machinery in the design of power with drive, there is a certain amount of surplus.
When the motor can not run under full load, in addition to meet the requirements of power driven,
The surplus torque increases the active power consumption, resulting in the waste of electric energy FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL FX2NC (DSS/DS) SERIES
Speed control method of fan and pump equipment traditional by regulating the entrance or exit of the baffle, valve opening to regulate air flow and water flow
, the input power is large, and a large amount of energy consumption in the baffle, the valve in the process of closure FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL.
When using variable frequency control, if the flow rate is reduced, the speed of the pump or fan can be reduced to meet the requirements. Can use the encoder to perform vector control.
Combined use of the position detector (PLG) with the position of the main shaft of the working machine,
Can be carried out on the position of the spindle stop (directional) control.
The speed is kept constant through feedback motor rotation speed FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL. Max input / output points: 14 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor ooutput (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL.
The series PLC can not be brought with the expansion module, but can be installed by the BBD board to extend a small amount of I/O FX2NC (DSS/DS) SERIES Manual FX2NC (DSS/DS) SERIES HARDWARE MANUAL.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.