MITSUBISHI FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL

Convert connector to screw relay terminal.
2 wire connection, no need to use common terminal.
Positive common end use. Function extension for connection to special adapters.
DC5V power consumption: 0mA. MITSUBISHI inverter FR-F740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 500KW FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL.
The main circuit of the inverter can be divided into two categories in general: voltage type is the voltage source of the DC converter for AC inverter,
The filtering of the DC circuit is the capacitance; the current mode is the DC conversion of the current source to the AC inverter,
The DC loop filter is the inductor FX1N-60MR-001
Why is the frequency of the inverter voltage proportional to the change?
The electromagnetic torque of any motor is the result of the interaction between the current and the magnetic flux, the current is not allowed to exceed the rated value, otherwise it will cause the heating of the motor FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL.
Therefore, if the magnetic flux decreases, the electromagnetic torque will decrease, which leads to the reduction of the load carrying capacity. Function: CPU module (internal service power supply) FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL.
Input and output points: 32 points.
Power supply capacity (DC5V power): 900mA.
Power supply capacity (DC24V service power supply): 400mA.
Input / output mode: DC input (drain / source) / transistor (drain).
Input points: 16 points.
Output points: 16 points.
The new expansion module is more convenient!
Pioneer products with advanced built-in functions and rich extensibility.
FX5U built-in analog, communication, high speed input and output,
By extending the board and adapter can be easily extended system.
In addition, through the high speed system bus,
Can maximize the role of the built-in intelligent functions of the expansion device.
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Input and output points: 14 points.
Power supply: AC100-240V.
Input points: 8 points.
Output points: 6 points.
Output form: transistor output (drain).
Power consumption: 19W.
Weight: 0.3KG.
Outline dimension: 60x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performancce of FX1S above the expansion of the expansion of the new model FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet FX1N-60MR-001 Manual FX1N-60MR-001 HARDWARE MANUAL.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc..