MITSUBISHI FR-S520E-2.2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL

MITSUBISHI inverter FR-F740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 280KW.
The main circuit of the inverter can be divided into two categories in general: voltage type is the voltage source of the DC converter for AC inverter,
The filtering of the DC circuit is the capacitance; the current mode is the DC conversion of the current source to the AC inverter,
The DC loop filter is the inductor FR-S520E-2 FR-S520E-2.2K2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL.
Why is the frequency of the inverter voltage proportional to the change?
The electromagnetic torque of any motor is the result of the interaction between the current and the magnetic flux, the current is not allowed to exceed the rated value, otherwise it will cause the heating of the motor FR-S520E-2.2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL.
Therefore, if the magnetic flux decreases, the electromagnetic torque will decrease, which leads to the reduction of the load carrying capacity. Auxiliary parts for FX3GC and FX3UC. "Voltage level: three phase 400V.
Applicable motor capacity: 315kw.
Substrate coating: have.
Built in DC reactor.
The operating frequency of the fixed alternating current is converted to DC power FR-S520E-2.2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL. Input points: 32 points
Input mode: DC24V (drain / source).
Connection status: connector.
In order to extend the input output of the device.
Also has a built-in power supply products.
The maximum number of points for the input and output is 256.
Expansion module: up to 16 units (in addition to the power expansion module)
The total number of CC-Link, AnyWireASLINK, and Bitty series of remote I/O is 512 points. Input points: 4 points.
Weight: 0.02kg.
Function expansion board is used in the FX3SA, FX3S, FX3GA, FX3G, FX3GE on the small number of input and output extension of the product,
Can be built into PLC. Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use. Cable length: 2m.
RS-485 terminal unit conversion unit.
Applicable model: GT16. MITSUBISHI inverter series: FR-F842.
Voltage level: three phase 400V.
Power: 355kw.
SLD converter rated current: 770A.
Structure and function: the rectification part is off type.
Type: CA.
Substrate coating: have.
Energy saving by high efficiency motor.
Reduce standby power consumption.
DC24V external power supply, the input MC signal can be stopped after the motor for the OFF, in the motor drive for the ON.
Standby power management can be carried out by means of frequency converter to realize the power consumption reduction of standby time.
According tto the temperature of the inverter cooling fan, the operation of the inverter can be controlled FR-S520E-2.2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL.
According to the operating conditions of the inverter cooling fan output the correspondinng signal,
Therefore, the inverter and other built-in fan and inverter cooling fan synchronous operation FR-S520E-2.2K Detailed Manual FR-S520E-2.2K INSTRUCTION MANUAL.
Can reduce the power consumption in the stop.