MITSUBISHI FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL

A 20 pin connector is installed on one side of the loose line.
Length 5M. The operation, monitoring, parameter modification and other operations can be carried out by computer or PLC.Max input / output points: 48 points.
Supply voltage: 100 - 240VAC.
Input points: 24 points.
Output points: 24 points FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL.
Output type: Transistor (source).
Power consumption: 50VA FR-F740-37K-CHT
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). Axis of control: 1.
Applicable PLC:FX1N, FX2N, FX3U, FX2NC (to FX2NC-CNV-IF).
Applicable PLC:FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V).
7 operating modules required for easy positioning control are provided.
Type oof instruction, please refer to the list in front of you FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL.
One can control a shaft.
FX3U, PLC FX2N can connect up to 8 units,
PLC FX2NC can connect up to 4 units,
PLC FX3UC can connect up to 77 units, so that it can control more than one independent axis FR-F740-37K-CHT Manual FR-F740-37K-CHT TECHNICAL MANUAL.
Maximum can output 100kHz pulse train.
Positioning control through the control program.