MITSUBISHI FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL

Connecting cable for handheld GOT and PLC.
Cable length: 3 meters.
Application: RS-422 connection and RS-232C connection. Connecting cable for handheld RH GOT and PLC.
Cable length: 1.5 meters.
Application: RS-422 connection (A/QnA series). MITSUBISHI inverter FR-E720 series.
Voltage level: 3 phase 200V FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL.
Frequency converter capacity: 3 FR-D720-008 to 318-NA7KW.
In order to ensure the reliability of production, all production machinery in the design of power with drive, there is a certain amount of surplus.
When the motor can not run under full load, in addition to meet the requirements of power driven,
The surplus torque increases the active power consumption, resulting in the waste of electric energy.
Speed control method of fan and pump equipment traditional by regulating the entrance or exit of the baffle, valve opening to regulate air flow and water flow
, the input power is large, and a large amount of energy consumption in the baffle, the valve in the process of closure FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL.
When using variable frequency control, if the flow rate is reduced, the speed of the pump or fan can be reduced to meet the requirements FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL. Max input / output points: 14 points.
Power supply voltage: DC24V.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor outpput (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL.
The series PLC can not be brought with the expansion module, but can be installed by the BBD board to extend a small amount of I/O FR-D720-008 to 318-NA Manual FR-D720-008 to 318-NA INSTRUCTION MANUAL.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.