MITSUBISHI
Home >> Download >> MITSUBISHI >> Manual Download >> MITSUBISHI AD51H-BASIC Manual AD51H-BASIC Programming Manual

MITSUBISHI AD51H-BASIC Manual AD51H-BASIC Programming Manual

Brand: MITSUBISHI
Product model: AD51H-BASIC
Name: Programmable Controller
Sort: Programming Manual
File language: English
File size: 18.71MB
SRAM PC card.
Applicable models: A95_GOT (-M3) /A956WGOT. "I/O slots: 5 slots.
Outline dimension: 325*130.
CPU basic board can be plugged into 1 power modules,
1 CPU components and a maximum of 2, 3, 5, or 8 single slot size special function components and I/O components are respectively inserted and arranged AD51H-BASIC Manual AD51H-BASIC Programming Manual.
Expansion ports are arranged on both sides of the base plate,
For connecting the expansion board for AD51H-BASIC
Up to 3 extension substrates. Bus connector conversion cable packageDC input points: 16 points.
Input voltage and current: 3/7mA, DC12/24V.
Response time: 10ms.
16 point /1 a public side.
Positive pole sharing.
Output points: 12 points.
Output voltage and current: DC24V/AC240V, 2A/1 point, 5A/1 common end AD51H-BASIC Manual AD51H-BASIC Programming Manual.
Response time: 12ms.
8 point /1 a public end, 3 point /1 a common end, independent contact.
Output form: relay output.
36 point terminal station.
Number of stations: 4 stops.
Compact remote I/O unit.
According to the control requirements of the system, using the appropriate design method to design MITSUBISHI PLC program.
Procedures to meet the requirements of system control as the main line,
Write one by one to achieve the control function or the sub task of the program,
Gradually improve the functions specified by the system AD51H-BASIC Manual AD51H-BASIC Programming Manual.
MITSUBISHI PLC detection, fault diagnosis and display and other procedures.
These procedures are relatively independent, generally in the basic completion of the program design and then add.
Hardware simulation method is to use a number of hardware equipment to simulate the generation of the signal,
The signals are connected to the input end of the PLC system in a hard wired way, and the timeliness is strong.
Softwarre simulation method is in the MITSUBISHI PLC in the preparation of a set of simulation program,
The simulation provides the field signal, which is simple and easy to operate, but it is not easy too guarantee the timeliness AD51H-BASIC Manual AD51H-BASIC Programming Manual AD51H-BASIC Manual AD51H-BASIC Programming Manual.
Simulation of the process of debugging, debugging method can be used to segment, and the monitoring function of programmer.
Related products