MITSUBISHI A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual

RS-232C connection (micro computer connection).
Built in clock function.
Applicable models: A985 (-V) /975/970/960GOT. Input and output points: 480 points.
Program capacity: 7K step.
Basic command processing speed: 4.4 ~ 5.6us.
Power supply: input AC100 ~ 120/200 ~ 240V/ output 2A DC24V, 0.5A DC5V.
Modular: PLC is the basic components of a separate module A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual A953GOT-SBD-M3
Medium and large PLC used this way. Easy maintenance.
User program storage capacity: it is a measure of how much the user application can store the number of indicators.
Usually in words or K words as units. 16 bit binary number is a word,
Every 1024 words are 1K words. PLC to store instructions and data in words.
General logical operation instructions each account for 1 words A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual. Timer / counter,
Shift instruction accounted for 2 words. Data operation instructions for 2~4.
Relay output interface circuit of PLC
Working process: when the internal circuit output digital signal 1,
There is a current flowing through, the relay coil has a current, and then the normally open contact is closed,
Provide load current and voltage.
When the internal circuit outputs a digital signal 0, there is no current flowing through it,
The relay coil does not have a current, and the normally open contact is broken off,
A current or voltage that is disconnected from the load A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual.
It is through the output interface circuit to the internal digital circuit into a signal to make the load action or not action. For common cathode input module (2 line type).Input type: DC input, positive public end / negative public end.
Input points: 32 points.
Enter the response time: 0.2ms the following.
Rated input voltage / current: DC24V/5mA.
External connection: 1 wire.
Fast connector type.
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of thee program A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual A953GOT-SBD-M3 SW4D5C-GOTR-PACKE compatible Extended/Option Functions Manual Manual A953GOT-SBD-M3 Operating Manual.
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation.